These Top Jack Stands Are the Best for Auto Maintenance (2024)

Torin's Big Red alloy steel jack stands hold our top spot overall for quality, range of weight capacity options, and reasonable price point. Plus, Torin is a highly reputable company that's been around for decades, and their jack stands come with a one-year warranty.

The jack stands are available in capacities of 2, 3, 6, and 12 tons, respectively. We highlight the 6-ton option here, which is ideal for lifting bigger trucks and SUVs. Their height adjusts from 15.38 inches up to 23.83 inches, and the saddle up top is designed to accommodate big axles and frame rails. They lock using a basic ratchet setup.

If you have a small car, ATV, or motorcycle, go with the 2-ton set. The design is the same, but their height ranges from 10.7 inches up to 16.55 inches, which makes them great for getting under sports cars and compacts with relatively low ride heights.

Key Specs

This set of two Pro-Lift jack stands comes with a 3-ton weight rating, suitable for small and mid-size cars. The assembly is all steel alloy, with about 7.6 by 6.85 inches of spread at the feet.

These stands use two locking mechanisms for safety. The ratchet lock allows the head to move up freely, but not down until the lever is released. An additional metal pin further prevents the stand from slipping.

Height ranges from 11.3 to 16.75 inches, which covers most vehicles, but may not be suitable for lowered cars or tall trucks. Pro-Lift also includes a one-year warranty with purchase.

Key Specs

The Esco stand features ten variable height settings and a wide 12-inch footprint for added stability while holding the vehicle. It uses a thick metal pin to lock itself in place, with a height range from 13.2 to 21.5 inches.

The body uses silver powder coating for rust protection, and the stand’s head features a thick rubber pad to protect the car’s underside from potential dents and scratches. The weight rating is also fairly heavy duty, at 6,000 pounds per unit. However, each stand will have to be purchased individually, rather than as a set.

Key Specs

This assembly features a bright blue and yellow color scheme, with a 9 by 7.5–inch footprint. It's manufactured in the United States, and comes with a two-year warranty with purchase.

Locking is achieved with a simple ratchet mechanism, which extends from 12 to 19 inches. Not a lot of range, but those couple extra inches at the top can come in handy when lifting vans and crossovers. Each stand is rated to hold up to 3,000 pounds, for 6-ton total capacity in the set of two.

Key Specs

These lightweight cast aluminum jack stands use a compact design that’s great for keeping in a trunk or tool kit. The assembly features a hollow tube with a 6.75-inch flat base for added stability. A thick stainless steel pin is used to hold the arms in place, with each stand rated for up to 3,000 pounds of load.

Height range is on the lower end, from 10.75 to 15.63 inches, though it's tough to expect more given their size. Just note that they're not recommended for working on large trucks and SUVs.

Key Specs

With a 6-ton capacity, this jack stand set is suitable for mid-size cars, up to larger SUVs and light-duty trucks. Each stand also features a double locking mechanism for added strength.

Lift settings range from 16 to 23.5 inches, which is suitable for taller ride heights. The footprint is also fairly wide, with 10.65 by 9.38 inches of coverage at the base. With their 6-ton weight capacity, they can also hold up to 6,000 pounds at each corner of the vehicle.

Key Specs

The Unijack is essentially a bottle jack with a ratcheting lock built in, which can come in handy for quick operations like changing a tire by the roadside.

The flat 9 by 9–inch footprint prevents the jack assembly from slipping or tilting, with an impressive height range of 11 to 21 inches. Also, the single stand features a 6,000-pound weight rating.

However, the integrated nature of the tool does make it heavier than many typical designs. Lifting more than one corner of the vehicle will also require multiple to be purchased, and they’re pricier than more traditional jacks and stands.

Key Specs

These Sunex stands are a good solution for medium-duty and lifted trucks, with a high weight capacity of 10 tons. They can also be used to hold suspended components like transmissions in place.

The assembly is held up by four elongated legs, with a sturdy post held in by a thick steel pin. The legs spread out to form a 16.75-inch square footprint, giving optimal stability. Height ranges from 28.1 to 46.5 inches, which will likely be too tall for smaller vehicles. The assemblies are also heavier and more expensive, with each stand weighing in at over 50 pounds.

Key Specs

This Torin kit includes both two jack stands and a 2-ton floor jack to get you started on auto repairs. That 2-ton rating means that the set is best suited for compact cars and small sedans.

The stands adjust to a wide range of heights, from 5.5 inches up to 13.4 inches, making them ideal for slipping under low vehicles. They're tall enough at higher settings for standard sedan ride heights. This one also comes with a one-year warranty for peace of mind.

Key Specs

These Sunex jack stands feature uncompromising weight capacity, thanks to their thick steel construction. With a 22-ton rating, they can handle repairs on cars, trucks, RVs, and some buses. The heavy-duty construction naturally leads to more weight, with each stand being over 30 pounds.

The arms of the set taper out to flat bases that measure about nine inches square. A drawback of the stout design is that the height range is relatively short, spanning from 11 to 17.3 inches. This will be adequate for most vehicles, but may be lacking for lifted trucks in particular. A two-year warranty is also included.

Key Specs